Here is a quick hack to adjust the lower beam (projection lamp) on the Pulsar 220 DTS-Fi. The below steps can help change the focus height of the lower beam.
-Park the bike on the main stand
-Turn on the low bean with engine running in neutral
-Bend down on the left side on the bike, and put your right hand inside the faring, just below the space under the lamp assembly
-Feel for a metal U section on the right side of the assembly
-Just inside this U section, feel for a plastic butterfly knob
-This can be rotated to change the beam height (cut off)
-Clockwise rotations make the beam go higher and higher, and vice-versa
I think its perfectly safe for this to be done by feeling around, if done slowly and cautiously. A slim hand works better is what I found. Next, I'm trying to locate a similar knob for the upper/high beam; will write back if one such is found.
Disclaimer: You are on you own if you end up screwing up something :)
-Park the bike on the main stand
-Turn on the low bean with engine running in neutral
-Bend down on the left side on the bike, and put your right hand inside the faring, just below the space under the lamp assembly
-Feel for a metal U section on the right side of the assembly
-Just inside this U section, feel for a plastic butterfly knob
-This can be rotated to change the beam height (cut off)
-Clockwise rotations make the beam go higher and higher, and vice-versa
I think its perfectly safe for this to be done by feeling around, if done slowly and cautiously. A slim hand works better is what I found. Next, I'm trying to locate a similar knob for the upper/high beam; will write back if one such is found.
Disclaimer: You are on you own if you end up screwing up something :)
6 comments:
hii buddy. I too own the prestigious P220. I faced a peculiar problem of oil leakage from the engine( front - where silencer starts off ) and the oil was spillin on silencer, burnin black and smellin , fumin. after 4 visits to khivraj its somehow solved but i still doubt coz i still feel the oil burnin smell after i do 10 km. and engine gets over heated. its jus 500kms old and this problms surface. is this engine heatin common? it gets very hot for jus 5 km ride and i can feel the heat on my legs. Did this happen to you also? anything can be done for this? please let me know wat is this auto - service, venkat shyam. i need someone to help me out wid my baby. the rear brake is somehow not free i feel coz when i keep the bike off and rotate the rear tyre it doesnt happen freely. i felt the disc is held up somehow. please suggest what can be done and wher to go ... thanks in advance
now you are giving tips?? utterly laughable...lol
Dude, clockwise lowers the beam and anti-clockwise raises the beam.
Also the high beam adjuster is very difficult to find .....looks like BAL didn't consider ease of maintenance in it's design parameters.
hey dude..ur blogs help me a lot...btw do u have any tingling noise from ur silencer i.e when u accelerate u get an awkward sound...n also whats with the check oil warnin in the digital console...its always givin a warnin...k anyway its a great bike..n keep the blogs coming....great job....
Thanks for the gr8 comments guys!
Yes I had some disturbing sound from the silencer in the beginning. But it just faded off slowly...
hi guys , i own a p22o which is just 6months old and my mileage boss doesnt seem to increase from 35kmpl,do u guys get a better mileage,i m ok wid it bt some of my frenz owning same bikes claims to get better mileage than me ...around 45kmpl is it true
Post a Comment