Here is a quick hack to adjust the lower beam (projection lamp) on the Pulsar 220 DTS-Fi. The below steps can help change the focus height of the lower beam.
-Park the bike on the main stand
-Turn on the low bean with engine running in neutral
-Bend down on the left side on the bike, and put your right hand inside the faring, just below the space under the lamp assembly
-Feel for a metal U section on the right side of the assembly
-Just inside this U section, feel for a plastic butterfly knob
-This can be rotated to change the beam height (cut off)
-Clockwise rotations make the beam go higher and higher, and vice-versa
I think its perfectly safe for this to be done by feeling around, if done slowly and cautiously. A slim hand works better is what I found. Next, I'm trying to locate a similar knob for the upper/high beam; will write back if one such is found.
Disclaimer: You are on you own if you end up screwing up something :)
-Park the bike on the main stand
-Turn on the low bean with engine running in neutral
-Bend down on the left side on the bike, and put your right hand inside the faring, just below the space under the lamp assembly
-Feel for a metal U section on the right side of the assembly
-Just inside this U section, feel for a plastic butterfly knob
-This can be rotated to change the beam height (cut off)
-Clockwise rotations make the beam go higher and higher, and vice-versa
I think its perfectly safe for this to be done by feeling around, if done slowly and cautiously. A slim hand works better is what I found. Next, I'm trying to locate a similar knob for the upper/high beam; will write back if one such is found.
Disclaimer: You are on you own if you end up screwing up something :)
